Replace Your Adams Rite Lock With Zero Drilling

Introduction

If you’re a small business owner or property manager, you’ve likely dealt with an aging Adams Rite lock. These locks have been a standard for aluminum storefront doors for decades, but as technology and security expectations evolve, many businesses are looking for a keyless upgrade. The good news? You can replace your old Adams Rite lock without drilling any new holes or damaging your door. This guide will walk you through exactly how to do it — and how a modern solution like Easilok can make the process even easier.

---

Why Replace an Adams Rite Lock?

Adams Rite locks are reliable, but traditional key-based systems have several drawbacks:

• Keys can be lost, copied, or stolen.
• Re-keying and maintenance costs add up over time.
• Traditional mortise locks lack modern access flexibility.

Upgrading to a mechanical keyless system eliminates those concerns while preserving your door’s structure and appearance.

---

What You’ll Need Before You Begin

Before replacing your Adams Rite lock, gather the following tools and materials:

• Phillips screwdriver
• Flathead screwdriver
• Replacement lock (such as Easilok mechanical keypad lock)
• Measuring tape
• Small hammer (optional, for alignment)

Pro tip: Easilok locks are designed to fit the same cutout and screw positions as Adams Rite 4510 or MS1850 models, so you won’t need to drill or modify your door.

---

Step-by-Step Replacement Guide

1. Remove the Old Lock

Open the door and unscrew the faceplate screws. Carefully slide the old Adams Rite lock out of the mortise cavity. Keep the screws—you may reuse them.

2. Measure and Align the New Lock

Use a measuring tape to confirm the backset (commonly 31/32", 1-1/8", or 1-1/2"). Align your new lock’s latch to ensure it fits into the existing slot perfectly.

3. Insert and Secure the New Lock

Slide the Easilok keypad lock into the same mortise cavity. Screw it in using the original or provided hardware. Ensure the latch operates smoothly.

4. Attach the Exterior Trim

Install the keypad or exterior trim according to the product instructions. Easilok’s design allows for fast installation with no wiring or batteries.

5. Test the Operation

Before tightening everything, test both the latch and keypad. Make sure the lock operates freely from both sides.

---

Why Easilok Is the Ideal Replacement

Easilok is engineered as a drop-in replacement for Adams Rite locks. It features:

• 100% mechanical operation (no batteries needed)
• Durable all-metal construction
• Keyless access with customizable codes
• Compatible with most aluminum storefront doors

You’ll save installation time while gaining the peace of mind that comes from keyless convenience.

---

Conclusion & CTA

Replacing an Adams Rite lock doesn’t have to be a complex or expensive project. With Easilok, you can achieve a full upgrade in under 15 minutes — no drilling, no wiring, and no hassle.

👉 Explore Easilok’s full range of mechanical keypad locks at easilok.com and bring modern convenience to your storefront today.