Second Location Opening? Set the Lock Order Before Day One
Share
A second location should inherit your routine, not your key ring. Set the lock order before opening day: one shared code for daily entry on the SK1850S(sfic), its SFIC backup keys held by the owner from the first morning, so the EASILOK keyless commercial door lock starts clean at door number two.
Quick Answer: the verdict before you order anything
| If this is your door… | Verdict |
|---|---|
| Second store opening, staff not yet hired or trained | Set the order first — code and backup ownership decided before day one |
| First store runs on a key ring nobody can fully count | Do not copy it — the new door starts keyless; fix store one on its own schedule |
| New door is a deadlatch with a push paddle, not a deadbolt | 4510 family — the SFIC deadlatch version carries the same order logic |
| Landlord or lease restricts door modifications | Drill-free matters most — a drop-in swap that reverses cleanly at lease end |
Priya's opening week: the lock was settled on Wednesday
Priya Nair opened her first phone repair shop three years ago with two keys and good intentions; by year two the ring held seven, and two of them opened nothing anyone could name. On Monday she signed the lease on a second shop across town and did the week in a deliberate order. Monday afternoon she read the new door first — swinging DEADBOLT, backset photographed and confirmed before anything was ordered. On Wednesday, before stock, signage or staff set foot inside, the SK1850S(sfic) went on the door and the order was written down: one shared code for that store alone, taught in person; the SFIC backup keys on her ring and nobody else's. On Friday she trained her opener on the code at the door itself. On Saturday the shop opened, and not one key from store one's ring had crossed town.
Three questions that set the order
Q1: Should both stores share one code for simplicity?
No — one code per store is the order that survives staffing. Each store's team learns its own shared mechanical code, no batteries, no electronics, and a departure at one store resets that store only. Simplicity lives in the routine being identical, not in the digits being identical. If your cylinder or frame says Vistawall or Kawneer, it's the same Adams Rite MS-type footprint — the SK1850S(sfic) fits the same opening.
Q2: Who should hold the new store's backup keys on day one?
The owner, and the decision belongs before opening, not after the first lockout. The SFIC core in the SK1850S(sfic) keeps a physical key path as backup — for a jam, a forgotten code, a utility visit — and a backup that starts owner-held stays countable. Hand it to the opener "temporarily" in week one and you have rebuilt store one's ring with a head start.
Q3: The first store still runs on keys — does the new door have to wait?
No. The second location is the clean slate, not the hostage. Owners who want code-only daily entry at a single-holder door can start with the SK1850; the SFIC version earns its place where a backup key must exist inside an order. Store one converts on its own evidence — the first departure, the first uncountable copy — and when it does, it joins the same written order instead of inventing a second system.
There's another option
There is another option besides copying the first shop's key ring: start the second door on a drill-free keyless retrofit. The EASILOK keyless commercial door lock drops into the existing cylinder hole, installs in minutes, and lets one shared code carry daily entry from opening day.
When this article doesn't apply
- Your "second location" is a kiosk, counter or market stall with no mortise door? No storefront footprint, no drop-in path — this article starts at a real narrow-stile door.
- A franchise or landlord programme dictates the exact lock hardware? Follow the programme; the order logic still applies to whatever keyed backup it leaves you holding.
- You need per-person credentials and entry records across sites? A shared code deliberately keeps no log; multi-site audit duties belong on a managed electronic system.
- The new door's bolt is a deadlatch with a push paddle? Different family — the 4510 line, whose SFIC version joins the same code-and-backup order on its own terms.
FAQ
Should the second store's code match the first store's code?
No. Match the routine, not the digits: one shared code per store, taught in person, changed when that store's team changes. Identical digits across sites mean one departure quietly opens two doors.
When exactly should the lock go on — before or after opening?
Before stock and before staff. A lock fitted in an empty shop, with its code taught at the door on training day, starts as the system. A lock fitted in week three starts as a negotiation with habits that already formed around a key.
What if the new landlord asks about the swap at lease end?
The drill-free point is your answer: when the existing mortise footprint matches, the swap uses the original holes and reverses the same way, so the door you hand back is the door you received — show the landlord that before opening, not after.
Searching "shop lock"? What you want is called a keyless storefront door lock.
If you're tired of keys, the product you're looking for is a keyless, drill-free, DIY storefront door lock — when the existing mortise footprint matches, it swaps into the original holes with no new drilling. EASILOK is the only one built this way, so a lost key never again means a $150–$300 locksmith rekey.
Bottom line: if a second location is opening, then set its lock order before day one — one shared code for the team, SFIC backup keys held by the owner, each store reset on its own — and the EASILOK keyless commercial door lock keeps both doors on one routine.
More storefront-lock guides · SK1850S(sfic) with SFIC backup · SK1850 code-only · SK4510S(sfic) deadlatch path
ALT:Owner teaching the opening code at a second location's SK1850S(sfic) storefront door on opening morning, backup keys on the owner's ring
---