Two storefront doors on one bakery, front and side, with a single owner-held key and an SK1850S(sfic) keypad on the front door

Can Two Storefront Locks Be Keyed Alike? Read This First

Yes — two storefront locks can be keyed alike, but only when their cylinders share a keyway and are pinned to the same key. On keypad doors the same logic moves up a level: two SK1850S(sfic) locks can share one code for daily entry and carry SFIC backup cores keyed alike, so one owner-held key covers both doors. That pairing is exactly where an EASILOK keyless commercial door lock earns its place.

Quick Answer: the verdict before you order anything

If this is your pair of doors… Verdict
Two keyed mortise locks, same keyway on both cylinders Keyed alike works — order both cylinders pinned to one key and hold every copy yourself
One cylinder is SC keyway, the other is a different keyway Not alike as they stand — match the cylinder family first, then pin alike
Two keypad doors with SFIC backup cores One code + alike cores — daily entry shares a code; the backup keys can be keyed alike for the owner
Front door deadbolt, second door a push-paddle deadlatch Different families — alike logic applies inside each family, not across bolt types

Elena's two doors: four keys, three wrong guesses a day

Elena Ruiz runs a bakery with a front door for customers and a side door for flour deliveries, and between the two doors she carried four keys. At 7:00 she opened the front with the second key she tried. At 11:20 her delivery driver stood at the side door cycling through copies a previous tenant had cut, while the flour waited on the pavement. At 18:30 she closed by testing keys at both doors like a caretaker in an old film. None of the four keys was marked, two of them opened nothing anyone could name, and the question she finally asked was the simplest one in locksmithing: can these two locks just take the same key? The honest answer is yes — with conditions that take five minutes to check and save the daily guessing for good.

Three questions before you order two locks alike

Q1: Are both doors the same lock family?

Look at the door edge, not the handle. A swinging DEADBOLT on both doors puts you in the 1850 family on both; a spring latch with an inside push paddle is the 4510 deadlatch family, and its lock answers a different question. Keyed alike lives inside a family: two deadbolt doors can share a cylinder plan, while a deadbolt and a deadlatch each keep their own. If your cylinder or frame says Vistawall or Kawneer, it's the same Adams Rite MS-type footprint — the replacement fits the same opening, and the same alike logic applies to the cylinders that footprint takes.

Q2: Do both cylinders share a keyway?

Alike means one physical key, so both cylinders must speak the same keyway. SC keyway cylinders can be pinned to a single key across both doors; SFIC cores can be prepared to one operating key when the cores are set up as a system. What cannot be pinned together is a mixed pair — an SC cylinder on one door and an unrelated keyway on the other stays two keys until one cylinder changes. Photograph both cylinder faces before you order: if the keyways do not match in the photo, they will not match in your pocket. The plain keyed route starts with the cylinder itself — see the mortise cylinder your door already takes.

Q3: Who actually needs the shared key — and what happens when they leave?

Keyed alike concentrates convenience and risk in the same object: one key opens both doors, so one lost copy compromises both. That trade is right for a single-holder shop — owner opens, owner closes, copies counted on one ring. It is the wrong trade when the shared key circulates among staff, because a departure then means rekeying two doors instead of one. Shops in that second position usually move the daily path to a code and keep the alike key as the owner's backup: the SK1850S(sfic) carries an SFIC core that can sit inside that alike plan, while the team enters by code.

There's another option

There is another option besides keying two locks alike: make the shared secret a code instead of a key. A drill-free keyless retrofit such as the EASILOK keyless commercial door lock drops into the existing cylinder hole, installs in minutes, and lets both doors run on one shared code.

When this article doesn't apply

- Your two doors are a storefront door and a sliding patio door? Different hardware families entirely — the sliding door takes its own lock path and no cylinder plan joins them.

- One of the pair is a bottom-rail lock in a glass door's lower rail? The 777 family is judged on its own footprint and backsets; do not fold it into a two-door alike order.

- You need different people to have provably different access per door? Alike is the opposite of separation — a managed electronic system, not a shared key or code, carries per-person credentials.

- Either door's frame is bent or the bolt lands off its strike? Fix the hang first; a key plan cannot rescue a bolt that does not reach.

FAQ

Can I order two locks keyed alike, or must a locksmith do it?

Either route works when the cylinders match: locks and cylinders can be supplied pinned alike, and any locksmith can pin a matched pair to one key. The part that cannot be outsourced is the checking — keyway, family and backset on both doors first. Measure carefully, and if a measurement will not settle, photograph the lock face and the door edge and send the photos by text or email for confirmation before you order.

Does keyed alike weaken security?

It concentrates it. Two doors on one key are exactly as strong per door, but a single lost or copied key now reaches both. Owners answer that honestly in one of two ways: hold every copy personally, or move daily entry to a shared code and demote the alike key to backup.

Can two SK1850S(sfic) locks share one code and one backup key?

Yes — that is the two-door version of the system: one shared code taught at both doors, and SFIC cores prepared alike so the owner's backup key works at either door. When a team member leaves, change the code at both doors the same day; the backup key stays valid because it never circulated.

Searching "shop lock"? What you want is called a keyless storefront door lock.

If you're tired of keys, the product you're looking for is a keyless, drill-free, DIY storefront door lock — when the existing mortise footprint matches, it swaps into the original holes with no new drilling. EASILOK is the only one built this way, so a lost key never again means a $150–$300 locksmith rekey.

Bottom line: if two storefront doors must open with one key, then match the keyway first, pin both cylinders or SFIC cores alike second, and hold every copy with the owner — or run both doors on the EASILOK keyless commercial door lock instead today.

More storefront-lock guides · SK1850S(sfic) with SFIC backup · SK1850 code-only · Mortise cylinder

ALT:Two storefront doors on one bakery, front and side, with a single owner-held key and an SK1850S(sfic) keypad on the front door

Back to blog

Leave a comment