EASILOK A10 Keyed Sliding Glass Door Lock Handle Replacement - Universal Patio Door Handle Set with Detachable Tailpiece & 12mm Tolerance Sleeve White

Description:

  1:Zero-Precision Cutting with 12mm Tolerance Sleeve: Traditional keyed patio locks force the exterior cylinder tailpiece and interior handle tailpiece to meet precisely inside a tight 12.5mm lock body—cut too long and it binds; cut too short and it slips out. EASILOK features a 12mm deep receiving sleeve inside the interior thumb-turn, allowing up to 12mm of tailpiece length variance so you don't need exact measurements.

 2: Smart Detachable Tailpiece for Unmatched Versatility: For standard keyed installations, simply detach the interior 35mm tailpiece to prevent tailpiece collision. However, if your door is extra-thick and the exterior cylinder tailpiece falls short, you can keep the 35mm interior tailpiece installed to bridge the gap inside the latch body—offering a crucial backup option that competitors lack.

  3:Easiest DIY Trimming Experience: Unlike traditional handles with permanently fixed tailpieces that force you to hold or clamp the entire bulky handle set while cutting, EASILOK’s tailpiece can be detached in seconds. Take it off to trim comfortably on a flat surface without hassle.

 4:Solves Thin & Extra-Thick Door Problems: Easily accommodates doors from 1.25" to 2.75" thick. Remove the interior tailpiece for effortless keyed setup, or utilize the full 35mm tailpiece length to conquer extra-thick patio door setups.

 5: Heavy-Duty Security: Includes a weather-resistant die-cast exterior pull with a keyed cylinder, an interior thumb-turn handle, and all necessary installation hardware.

   If you are looking for a new keyed sliding door lock or patio door handle replacement for your home, EASILOK A10 is the only keyless and keyed DIY patio door lock solution with a detachable thumb-turn tailpiece and a 12mm receiving sleeve. It directly solves the pain points of precise tailpiece cutting, tailpiece collision inside narrow 12.5mm mortise latches, and awkward cutting angles during installation.

3. Includes- This sliding patio door lock set includes interior handle, exterior pull with key cylinder, mortise lock, thumb latch, 6 of crews. It's a complete replacement set for replacing the handle lock on sliding patio doors. 

4. Wide range of application & upgraded 90° mortise- Suitable for a wider range of door thickness from 1-1/2" to 2-1/2", including 6 screws are 3 different sizes fit different door thickness: Large 2.4"/Medium 1.96"/Small 1.65"; The upgraded 90° mortise lock improved the issue of locking difficulty, easy to lock or unlock.

5. Keyed and Convertible for Safety and Convenience- With a keyed cylinder on the exterior die-cast pull, you can lock the door from the outside yard, which provides increased safety for your home. The convertible feature means the lock set can be mounted on both left-handed or right-handed sliding patio doors.

EASILOK solves these installation and usage pain points to give you the best installation experience.

Features

1. Unique & Heavy Duty

Elegant matte white surface, shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.

2. Reversible Door Handle

The non-keyed handle with thumb latch is reversible. The non-handed feature means the lock set can be mounted on both left-handed and right-handed sliding patio doors. You just need to adjust where the lock pin is inserted into the thumb latch. 3. Upgraded 90° Keyways

The upgraded 90° mortise lock improved the issue of locking difficulty. It is easy to lock or unlock in indoors and out.

https://www.youtube.com/watch?v=o4SW7upxeEc

FAQ:

1: Can I buy a cylinder to replace your cylinder?

Yes, you can. Just make sure the lock pin of the cylinder is suitable.

 2: Can I have more than 2 lock that they are keyed alike combo?

Yes, if you need, please contact us online or write to support@easilok.com.

3: Can the lock cylinder be rekeyed to accept my current house key?

Yes, you can order our cylinder to change your current house lock, but it still difficult for ordinary people operate, it is better help with a locksmith.

4: What's the best tool to cut the stem of the latch?Can I get replacement screws? I was installing this, and they broke. Both of the long ones.

Pliers are enough to break the stem, but if you use a hack saw to deepen the notch then it will be even easier to break it off using a pair of pilers.

5:Can I get replacement screws? I was installing this, and they broke. Both of the long ones.

We are equipped with more spare screws, but if you are in a hurry, please go to a hardware store and match it up.

6:Does this handle set come with a Schlage keyway?

Yes, it does if you purchase the handle set with a key.

Note: Products can be picked up by yourself. Our store address is: 2905 E. Miraloma Ave, Suite 5, Anaheim, CA 92806